How To Find A Leak In Your Air Mattress
Long Story Short:- A leaked mattress can cause a big problem for your camping. You can use many methods to find a leak in your air mattress.

Submerging your mattress into the pool or bathtub is another awesome method to find a leak in an air mattress.

Using the powder trick is a very easy method to find a leak in an air mattress.

If your mattress is leaking then you have to know how to find a leak in your air mattress.

Finding a leak in your air mattress is a very difficult task. This task is like finding a needle in the grass.

You have to check the leak carefully. But, don’t worry I am going to explain some tips to find the leak in your air mattress.

Before you are going to check the whole mattress first you should check the cap or seal off the mattress.

If maybe occur of the bad seal or a cross-threaded cap. Here are some tried and true methods to find a leak in your air mattress. You can use methods and get the mattress back into use.

Let’s deep dive into the information.

How To Find A Leak In Your Air Mattress

How To Find a Leak in Your Air Mattress?

It is very hard to find a leak in the air mattress. First, check the seal of the mattress.

Here are some methods given, check them.

Method 1: Dish Soap Method

This is the best way to find the holes in the mattress.

You have to take the water in the bucket and then add some amount of dish soap to that water.

This method is a tried and true solution for finding the holes in pool floaties.

Next, take this water into the spray bottle. Dish soap makes the water more viscous.

When you spray this water on the mattress then it allows sticking to the surface of the mattress long enough for you to find the leak.

When you start spraying on the mattress. First, spray the water on the valve and around the valve to check for leaks.

Then spray the solution all over the mattress to find the leaks.

When you find a leak in the mattress then use duct tape or a permanent marker to mark its location.

Also Read:- How To Find A Hole In An Air Mattress Using Smoke Method

How To Keep An Air Mattress From Popping

Method 2: The Tissue Paper Trick

In this method, you have to use tissue paper. Here are some steps given to find the leak in the mattress.

Step 1 –

you have to take tissue paper. But, before that keep your mattress in a quiet place or area where you will have room to move around the mattress and you can flip your mattress.

How To Find A Leak In Your Air Mattress

Step 2-

Here is the main work of finding the leak. That’s why you have to work slowly and move the tissue on every part of the mattress.

Starting with the seams and the edges. Here are the areas where leaks are commonly found.

While you are moving the paper on the mattress then be careful and listen carefully for a slight hissing sound along with that you have to watch for any air disturbance that happens with the tissue.

While you moving the tissue make sure to do this over the bottom and top of the mattress. And don’t forget to do this as well as the sides of your mattress.

Method 3:  Powder Trick

For this method, you have to take a powder and spread it all over the mattress, blow air into the mattress then slowly inflate the more.

If you add more air then it will escape through the hole of the mattress at a faster rate.

When the air escape through the mattress then it causes the powder to blow upwards and makes a small powder cloud.

This happens if your mattress is leaked.

This cloud alerts you and gives information on the location of the leak.

Method 4: Submerging Your Mattress

When you are using this trick then you have to check the label of the mattress.

Some manufacturers mention on the label that does not submerge their products.

Next when you are allowed to submerge the mattress then first blow the mattress with air.

Do not fully inflate the mattress because it can cause the very difficult to submerge in a bathtub or pool.

After you submerge the mattress in the bathtub or pool. Check carefully and check if any air is out of the valve.

Apply some pressure and see if the air comes out of the mattress.

Pay close attention to the area where the seams appear.

After you find the hole in the mattress mark it and then dry the mattress in sunlight.

How To Find A Leak In Your Air Mattress

Read more : How to Get an Air Mattress Off The Floor?


Some methods are given to find the leaks in the mattress.

I want to tell you that when you are buying an air mattress then check the mattress carefully and use it carefully.

Do not use a knife on the mattress or any sharp thing do not put on the mattress. Because it can damage your air mattress.

I hope you are satisfied with the information given in this article.

If you want to get more information about the mattresses then you can check other articles.

And stay connected because I am going to share more amazing information about mattresses.

And I will try my best to solve your problems and answer your questions.


1. How do you stop an air mattress from leaking?

Check the leak in the air mattress by using the methods like dish soap method, tissue paper trick, and powder trick.

You can use any one method to check if the mattress is leaking or not.

When you find the hole then clean the area. After cleaning you have to use an adhesive and some plastic or you can use vinyl patches to cover the leak.

After patching keep it for the set. It may take several hours so keep patient.

When the patch sets you can check the mattress again and ensure the mattress is no longer leaking.

2. Can you fix an air mattress leak with dust tape?

Yes, you can fix an air mattress leak using duct tape and vinyl tape. Both work very well on leaking mattresses.

How To Find A Leak In Your Air Mattress

3. What is the most weight an air mattress can hold?

There are three types of air mattresses. Regular twin air mattress, Full air mattress, and King size air mattress.

Regular twin-air mattresses can find weight up to 300 lbs.

A King size air mattress has a weight capacity of 500-600 lbs.

A full-size air mattress can hold a weight between 400-500 lbs.

A twin mattress is suitable for an average-weight single sleeper.

4. What is the best sealant for an air mattress?

There are many sealants like gorilla glue, super glue, contact cement, and rubber cement all work well.

Along with that, you can use Coghlan’s Airstop Sealant. You can use superglue for patching the leaks on the air mattress.